How to Carve a Pumpkin

How to Carve a Pumpkin

 

HOW TO CARVE A PUMPKIN

This is a great How-To, Step-By-Step, instructional on How to Carve a Pumpkin.

Anyone can do it!

You just need some tools, (many of which can be found in your home), a pattern from a magazine or one you have printed out online, a nice pumpkin, AND a little bit of patience.

 

Gordons Mummy Pumpkin_small

The Mummy

The Mummy is a favorite movie of ours, we even have featured on our website, Our Mummy Halloween, so it made sense to carve a mummy themed pumpkin for Halloween.

The Mummy Pumpkin_small Gordon Mummy Pumpkin_small

We have probably seen this movie a thousand times and never get bored with it. 

It has everything that we love, comedy, adventure, exotic location, beautiful, intelligent female heroin, handsome leading man, ancient artifacts, pyramids of Egypt, and of course, THE MUMMY.

Imhoteps skull and pumpkin_small

The Mummy’s name is Imhotep so we had to have a skull wrapped in bandages to represent Imhotep’s mummification. 

The Mummy pumpkin carving_small

Our Mummification Room

Beautiful Fabric for table_small Anck entering the afterlife_small

Our Mummy Halloween

Above you can see our beautiful mummy, Anck-su-namun, Imhotep’s beloved.

Halloween trick or treat table_small

Add some lovely fabric draped all around, some mummy props, and don’t forget the fog machine.

The Mummy Halloween_small

———————————————————————

Click Here For:  The Mummy Halloween

————————————

How To Carve A Pumpkin

Gordons pumpkin The Mummy_small

Gordon Whann

how to carve a pumpkin_small

Pumpkin Carving Tools and Patterns

The pumpkin pattern_small

The pattern we just printed out from the internet using regular computer paper.

————————————-

step 1_small step 2_small

The first thing you want to do is select a picture you want to carve.  One that only has two colors is best, because it shows off the areas you will carve better.  You then need to choose a pumpkin that will work for your picture.    Here, I was able to find a tall one which can easily hold both drawings.

You want to carve on the “flat” surface of the pumpkin.

I then use the thin carving tool to carve out the top portion of the pumpkin.  You must do this at a slight angle or the top will fall into the pumpkin.  I also put a wedge in the top to easily locate its position.

Step 3_small Step 4_small

Lift up the top and slice off the excess pumpkin.

Step 5_small Step 6_small

You can slice off a good portion of the pumpkin depending on its thickness.

Step 7_small Step 8_small

Now, you need to extract the seeds to cook later along with the stringy parts of the pumpkin later on.

Step 9_small

Use the scraping tool which comes with most kits.  It is short and has a broad scoop.  A rice paddle will work as well.

I usually scrape the inside just enough to make it smooth.

Step 10_small Step 11_small Step 12_small

Only save the well formed seeds to eat later.

Step 13_small

Choose the best side of the pumpkin for your carving and use painters tape to secure your pattern to the pumpkin.

tape pattern to pumpkin_small

Using painters tape makes it easy to remove your pattern when done.

You may have to fold some of the edges down flat in order to keep the picture flat.

Step 22_small making the holes_small

Take the pointing tool and carefully outline your pattern ensuring to pinpoint all the corners and curves.

Step 23_small Step 24_small

This will take some time to do.

step 25_small Step 26_small

Here you can see the pinpoints in the words. 

You could also use strong toothpicks, or even an ice pick to poke the holes.

Step 27_small Step 28_small

Peel off your picture and reveal your pattern.

Step 29_small Step 30_small Step 31_small

You need to scrape the pumpkin thin in order to allow the light to shine through.  You need to gently press on the outside of the pumpkin to test the thickness.

—————————

Cute Pug Break

Sugar and Monk pumpkin_small Our Monkee pumpkin_small

Sugar and Monk Always with Us  🙂

——————————-

With the pattern now on your pumpkin, choose if you want to just remove the outer skin or carve fully out the letters.  You need to think how light will enhance your picture and using a combination of these is very effective.

Step 32_small Step 33_small

I use a sharp thin knife to make these cuts.

Step 34_small

Take your time and keep your knife at the same angle for the best results.

Step 35_small Step 36_small

Step 37_small Step 38_small

Step 39_small Step 40_small

I also use wood carving tools to clean up the edges and smooth the lines.

Step 41_small Step 42_small

Here, I removed the M to use light to better enhance the word, Mummy.

Step 43_small Step 44_small

When you carve all the way through the pumpkin, you are able to check the thickness which will let more or less light through.

Step 45_small

Here you can see the almost finished pumpkin.

Step 46_small

I wanted to use light to highlight the sides of the face in order to match the picture, so I used a potato peeler and took off shavings.

(Gordon actually used two different kinds of potato peelers here.)

Step 47_small Step 48_small Step 49_small

I think it worked, and turned out well!

Step 50_small

———————————-

The Pumpkin Seeds

1 remove seeds_small 2 remove seeds_small 3 remove seeds_small

The seeds are important as they will make an excellent and delicious snack.

That recipe will be to follow.

———————————

Behind The Scenes

behind the scenes of the pumpkin carving_small

Me, standing on a stool taking the photos, as always.

Happy Halloween!

Julie and Gordon